Mounted Bearing Units category illustration

Engineering reference only. Category illustration; verify the offered drawing, source designation and quotation before ordering.

Mounted Bearing Units · UCP200 reference

UCP202 Pillow Block Bearing Unit

Review the shaft opening and housing mounting geometry separately. Overall length, center height, overall height and bolt spacing describe the unit; do not create radial bearing D/B values for the housing.

15 mm shaft opening; housing length 127 mm, center height 30.2 mm and bolt spacing 95 mm.

Request Quote View bearing family

Structure and designation

What this reference describes

Shaft and housing mounting dimensions describe a pillow block unit; housing length and height are not radial bearing D and B.

Family-specific dimensions

UCP202 bearing dimensions

Shaft and housing mounting dimensions describe a pillow block unit; housing length and height are not radial bearing D and B. Values are source-published millimetre references unless identified as a structural field.

dShaft diameter15 mm

LOverall length127 mm

H₂Overall height62 mm

HCenter height30.2 mm

JBolt spacing95 mm

BInsert inner ring width31 mm

Model	d — Shaft diameter	L — Overall length	H₂ — Overall height	H — Center height	J — Bolt spacing	B — Insert inner ring width
UCP202	15 mm	127 mm	62 mm	30.2 mm	95 mm	31 mm

Model-specific review

Interpret this model's dimensions

The middle shaft opening in the selected UCP set uses the same recorded housing footprint as its two neighbors. Confirm the insert identity as well as the mounting pattern; a common base outline is not a complete unit specification.

Specification boundary

Confirm the offered configuration

These values describe the cited engineering reference. They do not verify LTO-specific load ratings, speed limits, material, precision, clearance, seals, application suitability or interchangeability. Provide the complete designation, quantity, drawing and operating conditions for quotation review.

Source transparency

Technical reference and provenance

Reference publisher NTN; designation UCP202. Source checked 2026-09-21. Reference data alone do not establish the exact supplied configuration.

Model	UCP202
Bearing family	Mounted Bearing Units
Dimension schema	pillow_block_unit
Source document	NTN Ball and Roller Bearings 2203-GB
Reference designation	UCP202
Supply review	Sourcing, production coordination and quotation support; actual configuration confirmed per offer.

DIMENSION SOURCENTN — NTN Ball and Roller Bearings 2203-GBEngineering reference only. This source identifies data, not LTO manufacturing status or brand authorization.

Open official source

Sourcing and quotation

Request a quote for UCP202.

Share the complete model, quantity, available drawing and operating conditions. We will review the offered specification and quotation details.

Request Quote