WhatsApp Request a quote
6205-2RS Sealed Deep Groove Ball Bearing
Reference-data notice. Boundary dimensions use the cited SKF-hosted Series 62 table. Performance values, where shown, describe the cited 6205-2RSH reference and are not LTO product claims. Approved LTO quotation data and drawings govern supply.

Bearing model database

6205-2RS Sealed Deep Groove Ball Bearing

The 6205-2RS is the generic double-contact-sealed form of the 25x52x15 mm 6205 size. It is considered where grease retention and contamination protection matter more than the lower friction normally associated with metal shields or an open bearing.

25 mm boreDeep Groove Ball BearingsOEM / custom review
Request QuoteView Series

01 · Product Overview

Product Overview

The 6205-2RS is the generic double-contact-sealed form of the 25x52x15 mm 6205 size. It is considered where grease retention and contamination protection matter more than the lower friction normally associated with metal shields or an open bearing.

LTO supports OEM buyers, distributors and industrial users with suffix review, drawing-controlled requirements, private-label packaging and export documentation. Availability, minimum order quantity and production data are confirmed in the quotation.

02 · Boundary dimensions

6205-2RS bearing dimensions

Use the family-specific symbols below to compare the installation envelope. Dimensions are catalogue reference values in millimetres.

dBore diameter25 mm
DOutside diameter52 mm
BWidth15 mm
Modeld — Bore diameterD — Outside diameterB — Width
6205-2RS25 mm52 mm15 mm

Search intent supported: 6205-2RS bearing · 6205 2RS dimensions · 25x52x15 sealed bearing · 6205 sealed bearing. Confirm chamfers, radii, tolerances and mating-part details on the approved drawing.

03 · Engineering reference

Technical Specifications

Load ratings and speeds are cited-manufacturer catalogue references for preliminary comparison—not LTO-verified product specifications. Final values are subject to the LTO quotation and approved drawing.

Model6205-2RS
Bearing TypeSingle-row deep groove ball bearing
Supply modelLTO-branded supply; production route confirmed per quotation
Dimension data statusSKF-hosted Series 62 manufacturer catalogue reference
Performance data statusSKF engineering reference from cited catalogue; not an LTO verified specification
Material to confirmBearing steel with elastomer contact seals
Precision to confirmNormal; higher classes by quotation
Clearance to confirmNormal / C3 by quotation
Seal options to confirm2RS double contact seals (this model) · ZZ metal shields (published variant) · Open (published base model)
Reference dynamic load rating C14.8 kN catalogue reference
Reference static load rating C₀7.8 kN catalogue reference
Reference speed data8,500 r/min catalogue limiting speed for the double-sealed reference
REFERENCE SOURCESKF Rolling bearings catalogue — small 62-series deep groove ball bearingsBoundary dimensions use the cited SKF-hosted Series 62 table. Performance values, where shown, describe the cited 6205-2RSH reference and are not LTO product claims. Supply route: LTO-branded supply; production route confirmed per quotation.
Open official source

04 · Design

Features

  • Double contact seals for retained grease
  • 25x52x15 mm boundary dimensions
  • Contamination protection for appropriate environments
  • Speed checked using the exact manufacturer seal reference

05 · Enclosures

Seal Options

012RS double contact seals (this model)
02ZZ metal shields (published variant)
03Open (published base model)

Open, ZZ and 2RS are separate configurations for deep groove ball bearings. For roller, insert and mounted bearings, sealing is defined by the bearing and housing arrangement shown above.

Compare 2RS contact seals and ZZ metal shields →

Configuration family

6205 Bearing Variants

These published pages share the same nominal boundary dimensions but represent different enclosure configurations. Verify the exact suffix, friction, speed, lubricant and environment before approval.

6205 BearingSingle-row deep groove ball bearing6205-ZZ BearingSingle-row deep groove ball bearing

06 · Application paths

Applications

The bearing number is only the starting point. Load, speed, temperature, contamination, alignment and service-life targets determine the final selection.

Reference Industries for Engineering Review

Electric Motor BearingsReview operating conditions →Pump BearingsReview operating conditions →

These industry links are engineering review paths, not model-specific recommendations. Final bearing selection should be confirmed against the actual load, speed, fit, clearance, lubrication, environment and application requirements.

07 · Cross-reference screening

Replacement / Interchange

Possible search and drawing-reference candidates:

  • 6205-2RS basic dimensional designation
  • 6205-2RSH engineering reference—not verified interchangeable
  • Confirm internal clearance, precision, cage, enclosure, lubricant and offered manufacturer data
Not an automatic replacement. Match bore diameter (d), outside diameter (D), width (B), internal clearance, sealing, cage, precision, lubrication and load requirements before any substitution is approved.

Engineering context

Technical guides for this record.

Use only the guides relevant to this model's dimensions, enclosure, precision, clearance or designation.

Bearing Dimensions ExplainedReview the dimension symbols used by this bearing family. →Bearing Seal Types GuideCompare open, shielded and sealed enclosure structures. →Bearing Tolerance GuideDistinguish precision classes from internal clearance. →Bearing Number System GuideReview designation and suffix terminology. →

RFQ

Request a quote for 6205-2RS.

Send quantity, suffix, target brand or drawing, application, speed, load and destination. LTO will confirm the exact configuration before price or delivery commitments.

Request Quote