WhatsApp Request a quote
UCP206 Pillow Block Bearing Unit
Reference-data notice. Dimensions describe the cited UCP206D1 X AS3S reference. Performance fields, where present, are third-party engineering references and not LTO product claims. Approved LTO quotation data and drawings govern supply.

Bearing model database

UCP206 Pillow Block Bearing Unit

UCP206 is documented here as a cast-housing pillow block bearing unit with d 30 mm, L 165 mm, H₂ 83 mm, H 42.5 mm, J 121 mm, B 38.1 mm. The cited values support identification and engineering review; enclosure, clearance, accuracy, lubricant, fits and supplied performance remain quotation-controlled.

30 mm boreMounted Bearing UnitsOEM / custom review
Request QuoteView Series

01 · Product Overview

Product Overview

UCP206 is documented here as a cast-housing pillow block bearing unit with d 30 mm, L 165 mm, H₂ 83 mm, H 42.5 mm, J 121 mm, B 38.1 mm. The cited values support identification and engineering review; enclosure, clearance, accuracy, lubricant, fits and supplied performance remain quotation-controlled.

LTO supports OEM buyers, distributors and industrial users with suffix review, drawing-controlled requirements, private-label packaging and export documentation. Availability, minimum order quantity and production data are confirmed in the quotation.

02 · Boundary dimensions

UCP206 bearing dimensions

Use the family-specific symbols below to compare the installation envelope. Dimensions are catalogue reference values in millimetres.

dShaft diameter30 mm
LOverall length165 mm
H₂Overall height83 mm
HCenter height42.5 mm
JBolt spacing121 mm
BInsert inner ring width38.1 mm
Modeld — Shaft diameterL — Overall lengthH₂ — Overall heightH — Center heightJ — Bolt spacingB — Insert inner ring width
UCP20630 mm165 mm83 mm42.5 mm121 mm38.1 mm

Search intent supported: ucp206 bearing · bearing ucp206 · ucp206 bearing dimensions · ucp206 bearing size · ucp206 bearing specifications. Confirm chamfers, radii, tolerances and mating-part details on the approved drawing.

03 · Engineering reference

Technical Specifications

Load ratings and speeds are cited-manufacturer catalogue references for preliminary comparison—not LTO-verified product specifications. Final values are subject to the LTO quotation and approved drawing.

ModelUCP206
Bearing TypeCast-housing pillow block bearing unit
Supply modelLTO-branded supply; production route confirmed per quotation
Dimension data statusNSK dimensional reference for UCP206D1 X AS3S
Performance data statusNSK engineering reference; not an LTO verified specification
Material to confirmBearing and component materials confirmed by quotation
Precision to confirmAccuracy class confirmed by quotation
Clearance to confirmInternal clearance and fits confirmed by quotation
Seal options to confirmInsert seals, flingers and relubrication details depend on the offered unit
Reference dynamic load rating C19.5 kN catalogue reference
Reference static load rating C₀11.3 kN catalogue reference
Reference speed dataNot published in the selected official reference
REFERENCE SOURCENSK UCP206D1 X AS3S pillow block unit engineering dataDimensions describe the cited UCP206D1 X AS3S reference. Performance fields, where present, are third-party engineering references and not LTO product claims. Supply route: LTO-branded supply; production route confirmed per quotation.
Open official source

04 · Design

Features

  • 30 mm shaft diameter
  • 165 mm housing overall length
  • 42.5 mm shaft center height
  • 121 mm nominal bolt spacing

05 · Enclosures

Seal Options

01Insert seals, flingers and relubrication details depend on the offered unit

Open, ZZ and 2RS are separate configurations for deep groove ball bearings. For roller, insert and mounted bearings, sealing is defined by the bearing and housing arrangement shown above.

06 · Application paths

Applications

The bearing number is only the starting point. Load, speed, temperature, contamination, alignment and service-life targets determine the final selection.

Reference Industries for Engineering Review

Mining & Conveyor BearingsReview operating conditions →Agricultural Machinery BearingsReview operating conditions →

These industry links are engineering review paths, not model-specific recommendations. Final bearing selection should be confirmed against the actual load, speed, fit, clearance, lubrication, environment and application requirements.

07 · Cross-reference screening

Replacement / Interchange

Possible search and drawing-reference candidates:

  • UCP206 dimensional identification
  • UCP206D1 X AS3S NSK engineering reference—not verified interchangeable
  • Confirm design, suffix, tolerances and approved drawing before substitution
Not an automatic replacement. Match shaft diameter, housing footprint, overall dimensions, center height, bolt spacing, insert configuration and mounting requirements before any substitution is approved.

Engineering context

Technical guides for this record.

Use only the guides relevant to this model's dimensions, enclosure, precision, clearance or designation.

Bearing Dimensions ExplainedReview the dimension symbols used by this bearing family. →Bearing Tolerance GuideDistinguish precision classes from internal clearance. →

RFQ

Request a quote for UCP206.

Send quantity, suffix, target brand or drawing, application, speed, load and destination. LTO will confirm the exact configuration before price or delivery commitments.

Request Quote